51mm Hemmed Deflection Head 0.75bmt
Deflection Head Description
51mm Deflection Head is used as a component of the Nashco Steel Stud Wall Framing System. Nashco 0.75bmt Deflection Head includes a safety hem on the upper edge to minimise the chance of cuts and abrasions.
Deflection Head is used as the top track or plate of the wall. The Deflection Head is secured to the soffit or ceiling using a fixing through the back of the track. 51mm Studs are then held in the track by a friction fit connection. Note: Studs cannot be fixed through the side of Deflection Head, if a mechanical fixing is required. Slotted Deflection Head must be used.
Deflection Head must be used in lieu of Standard 32mm Floor Track in applications where structural deflection must be allowed for. Commons applications of the Deflection Head include multi-level concrete structures where the slab deflects or walls that run to the underside of structural steel.
0.50/0.55 Steel Stud Wall Framing System
The Nashco 0.50/55bmt gauge Steel Stud Wall Framing System is typically used for light-weight internal walls. Common applications include;
- Office Partition Walls
- Dividing walls for High Rise Apartments and Multi-residential
Nashco Steel Stud Wall Framing Systems provide architects, engineers and installers with a fast, easy and durable solution for light wight internal wall framing.
All Nashco wall systems comply with the relevant Australian standards and building codes for fire-rating sound rating and structural integrity, when lined with the correct lining material
There are many and varied uses of the 0.55bmt gauge Steel Stud Wall Framing System. Contact our technical team today to learn more about its applications and suitability for your project.
||51x50mm Deflection Head 0.75bmt x 3.0m